2001 DynaPath Model 750 — UMS record #14125
CNC Machining Centers, Vertical
Historical UMS record #14125
Specifications
TABLE
Length58"
Width13"
T-Slots.71" x 4
Table Load (Dynamic)990 Lbs.
Table Load (Static)1980 Lbs.
TRAVELS
X-Axis50"
Y-Axis22"
Z-Axis23"
Quill Travel (Manual)5 15/16"
SPINDLE
Motor7.5 HP.
Speeds ( Infinitely Variable & Programmable)40 To 3950 RPM
Gear Ranges2 Back Gear
Spindle Nose To Table Top3.5" To 23.5"
Spindle Center To Column22.5"
Quill Diameter4 5/16"
ACCURACY
Resolution0.0001"
Position Accuracy+/- 0.0004"
Repeatability+/- 0.0002"
RAPID TRAVERSE
X-Axis250 IPM
Y-Axis250 IPM
Z-Axis250 IPM
GENERAL INFO
Air Requirements80 PSI (With Draw Bar)
Coolant Capacity10 Gallons
Coolant Flow4 GPM
DIMENSIONS
Depth70"
Width120"
Height89.5"
Weight7,200 Lbs.
POWER
Voltage230V/3 Ph/60 Cycle
Amps32
KVA8
Equipped With
DynaPath Delta 2000M/CRT CNC Control
Menu Driven Conversational Programming
EIA/G-Code Programming With Assist
PC Based/ 32 Bit Technology
Pentium CPU
Hard Drive For Down Loading Files
3 ms Block Processing Speed
3 ms Servo Update Time
64K Ram For Program Part Storage
12" Color CRT
RS-232 Interface Port
Interpolated Graphics
3.5" Floppy Disk Drive
200 Tool Length/Cutter Diameter Offsets
32 Part Fixtures
Learn/Teach Modes
MDI Mode
BlackLash & Pitch Error Compensation
Programming Features:
Arc Mill, Cam Mill, Circle Mill, Frame Mill Programmed As A Single Event, Pocket
Milling Programmed As A Single Event, Bolt Circle, Blend Two Linear Moves,
Drilling Cycle G80-G84, Boring Cycle G85-G89, Tapping Cycles, Dwell, Helical
Interpolation, Absolute/Incremental Programming, Carte/Polar Coordinate
Prgramming, Part Rotation, Plane Selection, Part Scaling, Cutter Comp, Text Events, Concurrent
Concurrent Operation, Subroutines, Repeat, Mirror Image, Cavity Mill Canned Cycle
OPTIONS
Machine:
Power Draw Bar - $760.00
Electric Handwheel On Cord - $760.00
Table Chip & Coolant Splash Tray - $800.00
3D Digitizing With Renishaw MP-11 Probe - $11,600.00
Machine Prepped For 4th Axis DC Servo Amplifier & Motor Cable Wired For
Baldor Motor (Motor Not Included) - $2,995.00
Control:
Buffered Input - $500.00
Conversation Graphics - $500.00
Calc-Assist Package - $715.00
High Speed Machining - $1,995.00
Part Program Storage To 448K - $495.00
Part Program Storage To 896K - $995.00
RS-422 Serial Port - $515.00
Customer Preparred Cycle (User Macros) - $715.00
Probing Software - $930.00
STANDARD FEATURES
#40 Taper
Handles For Manual Operation
Work Light
Automatic Lubrication System
Manual Draw Bar
Fully Programmable Z-Axis
Flood Coolant With Operation By M Function
Precision Ground Double Nut Ballscrews
Chip & Coolant Tray
Slide Way Covers
Reference & Overtravel Limit Switches
Manuals