1996 Ensu EV-650A — UMS record #16670
CNC Machining Centers, Vertical
Historical UMS record #16670
Specifications
TABLE
Width39.375 "
Length24.4 "
Maximum Table Load3,300 lbs
TRAVELS
X-Axis Travel43.6 "
Y-Axis Travel25.59 "
Z-Axis Travel25.98 "
Spindle Nose to Table Top Minimum7.9 "
Maximum33.88 "
SPINDLE
Spindle Speed: Minimum (RPM)20 rpm
Maximum6000 rpm
Spindle TaperCAT 50
Main Motor (HP)15/20 hp
TOOL CHANGER
Tool Changer Positions30 atc
ADDITIONAL SPECS
Dist. From Front Column to Spindle Center26.4"
Rapid Traverse Feed Rates (X/Y/Z)787/787/591 IPM
Jog Feed Rate0-157.5 IPM
Cutting Feed Rates (X/Y/Z)0.04-394 IPM
Spindle Bearing Diameter4.3"
Spindle Ramp-Up Time3.4 Seconds
Spindle Horse Power20/10 HP
Spindle Torque352 Ft/lbs
Rigid Tapping3,000 RPM (Max)
Max. Tool Length15.7"
Max Tool Weight33 lbs
Tool Change Time (Tool to Tool)2.5 Seconds
Tool Change Time (Chip tp Chip)6.6 Seconds
Pallet Change TypeChain
Number of Pallets2
Pallet Change Time45 Seconds
DIMENSIONS
Size (w/o Pallets)118" x 146" x 120"
Size (with Pallets)178" x 146" x 120"
Machine Weight (w/o Pallets)21,400 lbs Approx
Pallet Weight7,000 lbs Approx
Equipped With
High Pressure Coolant Thru Spindle
Spindle Flood Coolant
Bed Flush Coolant System
5 HP High Pressure Coolant Pump
Air Flow Systems Mist Collector
Renishaw OMM Optical Receiver For Spindle Probe
(2) Pallets
Spindle Air Curtain
Spindle Oil Chiller
Spindle Load Meter
Manual Pulse Generator
Spindle Speed, Feedrate, and Rapid Traverse Override
Door Interlock
One Set "M" Codes
Helical Interpolation
Inch/Metric Switchable Capability
3-Axis Glass Scale
Air Blow Off System
(2) Hydraulic Fixtures
Optional Stop Panel Switch
Block Skip Panel Switch