Historical vertical machining center specifications based on 39 UMS machine records spanning 1990–2006.
Historical reference information — not a machine-for-sale listing. Values can vary by year, control, spindle package and optional equipment.
Historical VMC-4020HT Specifications by Year
Each block below is an actual historical UMS machine record for this exact model. Differences by year, control and configuration are preserved rather than averaged together.
1990 Fadal VMC-4020HT
1990 Fadal VMC-4020HT historical configuration
Control: Fadal 88/CRT
X-Axis Travel40"
Y-Axis Travel20"
Z-Axis Travel28"
Table Length47.94"
Maximum Table Load1500 Lbs.
Spindle Taper#40
Tool Changer Positions21
1 historical UMS record: #13527
1991 Fadal VMC-4020HT
1991 Fadal VMC-4020HT historical configuration
Control: Fadal 88/CRT
X-Axis Travel40"
Y-Axis Travel20"
Z-Axis Travel20"
Table Width20 "
Table Length47.94"
Maximum Table Load1500 lbs
Spindle Taper#40
Spindle Speed Maximum75 - 10,000 rpm
Main Motor (HP)15 hp
Tool Changer Positions21
Spindle Nose to Table Minimum4 "
5 historical UMS records: #17232, #3208, #1942, #13556, #13223. Recorded values vary within this year for: X-Axis Travel, Y-Axis Travel, Z-Axis Travel, Table Length, Maximum Table Load, Spindle Speed Maximum, Tool Changer Positions.
1992 Fadal VMC-4020HT
1992 Fadal VMC-4020HT historical configuration
Control: Fadal 88/CRT
X-Axis Travel40"
Y-Axis Travel20"
Z-Axis Travel20"
Table Width20 "
Table Length47.94"
Maximum Table Load1500 Lbs.
Spindle Taper#40
Spindle Speed Maximum10000 rpm
Main Motor (HP)22.5 hp
Tool Changer Positions21
2 historical UMS records: #14072, #16007. Recorded values vary within this year for: X-Axis Travel, Y-Axis Travel, Z-Axis Travel, Table Length, Maximum Table Load, Spindle Taper, Tool Changer Positions.
1993 Fadal VMC-4020HT
1993 Fadal VMC-4020HT historical configuration
Control: Fadal 88/CRT
X-Axis Travel40 "
Y-Axis Travel20 "
Z-Axis Travel28 "
Table Width20 "
Table Length48 "
Maximum Table Load1500 lbs
Spindle Taper40
Spindle Speed Maximum10000 rpm
Main Motor (HP)15 hp
Tool Changer Positions30 atc
Spindle Nose to Table Minimum4 "
4 historical UMS records: #30307, #3190, #1767, #15587. Recorded values vary within this year for: X-Axis Travel, Y-Axis Travel, Z-Axis Travel, Table Length, Spindle Taper, Spindle Speed Maximum, Main Motor (HP), Tool Changer Positions.
1994 Fadal VMC-4020HT
1994 Fadal VMC-4020HT historical configuration
Control: Fadal 88/CRT
X-Axis Travel40 "
Y-Axis Travel20 "
Z-Axis Travel20 "
Table Width20 "
Table Length47.94 "
Maximum Table Load1500 lbs
Spindle Taper40
Spindle Speed Maximum10000 rpm
Main Motor (HP)22.5 hp
Tool Changer Positions21 atc
Spindle Nose to Table Minimum4 "
6 historical UMS records: #30019, #16924, #1690, #2337, #14436, #14120. Recorded values vary within this year for: X-Axis Travel, Y-Axis Travel, Z-Axis Travel, Table Length, Spindle Taper, Spindle Speed Maximum, Main Motor (HP), Tool Changer Positions.
1995 Fadal VMC-4020HT
1995 Fadal VMC-4020HT historical configuration
Control: Fadal 88HS/CRT
X-Axis Travel40"
Y-Axis Travel20"
Z-Axis Travel20"
Table Width20 "
Table Length47.94 "
Maximum Table Load1500 lbs
Spindle Taper#40
Spindle Speed Maximum45 rpm
Main Motor (HP)22.5 hp
Tool Changer Positions21 atc
Spindle Nose to Table Minimum4 "
5 historical UMS records: #30689, #30656, #3357, #13642, #14003. Recorded values vary within this year for: X-Axis Travel, Y-Axis Travel, Z-Axis Travel, Table Width, Table Length, Maximum Table Load, Spindle Taper, Spindle Speed Maximum, Main Motor (HP), Tool Changer Positions, Spindle Nose to Table Minimum.
1996 Fadal VMC-4020HT
1996 Fadal VMC-4020HT historical configuration
Control: Fadal 88/CRT
X-Axis Travel40 "
Y-Axis Travel20 "
Z-Axis Travel20 "
Table Width20 "
Table Length47.94" "
Maximum Table Load1500 lbs
Spindle Taper#40
Spindle Speed Maximum10,000 rpm
Main Motor (HP)15 hp
Tool Changer Positions21 atc
Spindle Nose to Table Minimum4" "
4 historical UMS records: #16122, #13495, #2835, #14435. Recorded values vary within this year for: X-Axis Travel, Y-Axis Travel, Z-Axis Travel, Table Length, Maximum Table Load, Spindle Taper, Spindle Speed Maximum, Main Motor (HP), Tool Changer Positions, Spindle Nose to Table Minimum.
1997 Fadal VMC-4020HT
1997 Fadal VMC-4020HT historical configuration
Control: Fadal 88HS/CRT
X-Axis Travel40"
Y-Axis Travel20"
Z-Axis Travel28 "
Table Width20 "
Table Length47.94 "
Maximum Table Load1500 lbs
Spindle Taper40CAT
Spindle Speed Maximum10000 rpm
Main Motor (HP)22.5 hp
Tool Changer Positions21 atc
Spindle Nose to Table Minimum4"
3 historical UMS records: #30337, #13801, #3269. Recorded values vary within this year for: X-Axis Travel, Y-Axis Travel, Z-Axis Travel, Table Width, Table Length, Maximum Table Load, Spindle Taper, Main Motor (HP), Tool Changer Positions.
1998 Fadal VMC-4020HT
1998 Fadal VMC-4020HT historical configuration
Control: Fadal 88HS/CRT
X-Axis Travel40 "
Y-Axis Travel20 "
Z-Axis Travel28 "
Table Width20 "
Table Length48 "
Maximum Table Load1500 lbs
Spindle Taper40
Spindle Speed Maximum10000 rpm
Main Motor (HP)22.5 hp
Tool Changer Positions21 atc
2 historical UMS records: #16138, #30492. Recorded values vary within this year for: Table Length, Spindle Speed Maximum, Main Motor (HP), Tool Changer Positions.
2000 Fadal VMC-4020HT
2000 Fadal VMC-4020HT historical configuration
Control: Fadal CNC/crt
X-Axis Travel40 "
Y-Axis Travel20 "
Z-Axis Travel20 "
Table Width20 "
Table Length48 "
Maximum Table Load3641 lbs
Spindle Taper40
Spindle Speed Maximum10000 rpm
Main Motor (HP)22.5 hp
Tool Changer Positions21 atc
Spindle Nose to Table Minimum4 "
1 historical UMS record: #15926
2001 Fadal VMC-4020HT
2001 Fadal VMC-4020HT historical configuration
Control: Fadal 88HS/CRT
X-Axis Travel40 "
Y-Axis Travel20 "
Z-Axis Travel20 "
Table Width20.000 "
Table Length47.940 "
Maximum Table Load3641 lbs
Spindle Taper#40
Spindle Speed Maximum10,000 rpm
Main Motor (HP)15 hp
Tool Changer Positions21 atc
Spindle Nose to Table Minimum4 "
2 historical UMS records: #15060, #15059. Recorded values vary within this year for: Main Motor (HP).
2005 Fadal VMC-4020HT
2005 Fadal VMC-4020HT historical configuration
Control: Fadal CNC/crt
X-Axis Travel40 "
Y-Axis Travel20 "
Z-Axis Travel20 "
Table Width20 "
Table Length48 "
Maximum Table Load1500 lbs
Spindle Taper40
Spindle Speed Maximum10000 rpm
Main Motor (HP)22 hp
Tool Changer Positions24 atc
Spindle Nose to Table Minimum4 "
2 historical UMS records: #30925, #30305. Recorded values vary within this year for: Maximum Table Load, Main Motor (HP), Tool Changer Positions.
Have a machine you’re ready to sell, or looking to trade toward new equipment? We’ll be happy to work directly with you or with your OEM distributor if it’s a trade-in.
