1997 Mazak Multiplex 625 Mark II — UMS record #14771
CNC Lathes
Historical UMS record #14771
Specifications
CAPACITY
Swing (Left headstock / Right headstock)15.35 "
Swing Over Cross Slide (LH / RH)10.24 "
Maximum Machining Diameter (LH / RH)7.09 "
Maximum Machining Length (LH / RH)19.45 "
Maximum Distance Between Spindles46.45 "
SPINDLE
Spindle Speed: Minimum (RPM) (LH / RH)35 rpm
Maximum (LH / RH)4000 rpm
Spindle Bore (LH / RH)3.03 "
Spindle Nose (LH / RH)3.03
Main Motor (HP) (LH / RH)25/25 hp
TURRET
Number Of Turrets2
Number of Positions (LH / RH)12/12
X-Axis Travel (LH / RH)9.05/9.05 "
Z-Axis Travel (LH / RH)16.93/19.09 "
CHUCK
Diameter (LH / RH)10" "
Hole Thru (LH / RH)2.5 "
Number of Jaws (LH / RH)3/3
LIVE TOOLING
Number of Live Positions12/12
Motor5 hp
Speeds30-3000 rpm
Equipped With
10" 3-Jaw Hydraulic Chucks W/2" Hole On Second Spindle
Live Tooling On Each Spindle
Full C-Axis Contouring On Each Spindle
Chip Conveyor
Distance Between Spindles - 46.51"
Flood Coolant System
Coolant Guards
RS-232 Interface
Chuck Air Blast
Turret Air Blast
Auto Power Off
Hi-Pressure 1000 PSI Coolant
Parts Catcher
Multi-Tap Transformer
ATSA6TL Collet Chuck On Main
(2) Tool-Eye Probes
Misc. Tooling Package
Auto Chuck Jaws Open/Close
Status Control Lights
LNS Quickload Barfeed (On One Machine)
Chip Blaster
EIA/ISO Input Function
NOTE
(2) Machines Available 1997 & 1998
Gantry Loader (On One Machine)