2001 Mighty Viper B4000 BC 5-Axis — UMS record #14715
CNC Machining Centers, Vertical
Historical UMS record #14715
Specifications
TABLE
Width80.3 "
Length165 "
Maximum Table Load40000 lbs
TRAVELS
X-Axis Travel160 "
Y-Axis Travel102.4 "
Z-Axis Travel39.4 "
Spindle Nose to Table Top Minimum1.94 "
Maximum41.34 "
SPINDLE
Spindle Speed: Minimum (RPM)40 rpm
Maximum4000 rpm
Spindle Taper#50
Main Motor (HP)75/50 hp
TOOL CHANGER
Tool Changer Positions40 atc
TRAVEL
Distance Between Columns108.3"
Distance From Spindle Pivot Point To Tool Gauge Li11.3"
B-Axis+/- 115 Degree
C-Axis+/- 200 Degree
SPINDLE
Distance Spindle Center To Column Face15.08"
Distance Between Spindle Nose To Pivot Length10.51"
FEEDS
Rapids X,Y, Z393 IPM
Rapids B, C0 To 8 RPM
Cutting Feed Rate X, Y, Z197 IPM
Cutting Feed Rate B, C0 To 8 RPM
TOOLCHANGER
Positions40
TaperCat #50
Max. Tool Diameter5.9"
Max. Tool Diameter W/ Adj. Pockets Empty7.8"
Max. Tool Length13.78"
Max. Tool weight44 Lbs.
Equipped With
Machine Features:
High Performance Spindle Head with 75/50 HP AC Variable Speed Motor
Smooth Vertical Movement Of The Spindle Head, Well Balanced With Weights
Easy To Use Control Panel With Fanuc 15Mi Control
Rapid Positioning With 10m/min (393 IPM) Travel Speed
Fully Supported Bed Structure Features Excellent Rigidity and Stability
Anti-Friction Turcite-B Used In Rectangular Ground Ways
Telescoping Way Covers
Technical Features:
Spindle Head:
The Spindle Is Supported By Super Precise Angular Contact Bearing.
The Headstock Is A Box Type Construction
The Cartridge Type Spindle Is Used For Heat Dissipation And The Spindle Cooler Can
Effectively Maintain The Temperature Of The Cooling Lubricant
Electron Magnetic Sensor Is Used To Stop The Spindle Promptly and Accurately At The
Spindle Orientation Position.
Structure:
The Machine Body Is Made Of High-Grade Rigid Meehanite Cast Iron, Especially Heat
Treated To Relieve Stress And Ensure Structure Remas Distortion Free For Life
Large Diameter Preloaded Ball Screws Are Used On All Three Axis Reducing Thermal
Displacement. By directly Coupling Ball Screws To The Servo Motors, A High Degree
Of Positioning Accuracy Is Achieved, Resulting In Minmum Backlash.
The Slide Ways Are Fully Gibed To Maintain Constant And Stable Positioning. All The
Slide Ways Are Harened And Ground With Low Friction Turcite-B Coating Which Eliminates
Stick-Slip Condition. In Addition, Two Separate Automatic Lubricating Unit Are To Supply
Lubricant To The X, Y, And Z Slide WaysRespectively To Ensure Proper Lubrication On
Each Of Them. Machine Can Retain Excellent Accuracy Even After Years Of Operation.
Chip Disposal:
A Protective Cover Around The Table Prevents Chips And Cutting Oil From Splashing
Outside The Splash Guards. Chips Falling In The Rear Of The Table Are Stopped By The
Steel Plate Shutter Front Of The Column and By The Inclined Cover. They Fall Into The Chip
Tough.
Standard Accessories:
Full Length Splash Guards
Automatic Lubrication System
Air Blast Through Spindle
Leveling Bolts & Blocks
Chip Conveyor
Automatic Spindle Oil Temperature Regulator
Coolant System
Worl Lamp
Coolant Thru Tool