1992 Okuma GU-24SI — UMS record #14485
Grinders, Cylindrical, CNC
Historical UMS record #14485
Specifications
CAPACITY
Swing Over Table9.06 "
Distance Between Centers9.84 "
Max. Grinding Wheel Diameter9.06 "
Max. Workpiece Weight - Chucking44.1 Lbs
Max. Workpiece Weight - Between Centers55.13 Lbs.
GRINDING WHEEL
Max. Diameter16 "
Max. Width2 "
Hole5 "
Max. Speed8850 FPM
Wheel Speeds2110 & 2410 RPM
Total Travel14.96 "
Automatic Infeed Rate.00005 - 394 IPM
Positioning Speed787 IPM
Swivel Angle0 - 20 Degrees
Min. Programmable Increment.00001 Dia. "
Travel Per Pulse Handle Revolution.01;.1;.5 Dia. "
Travel Per Pulse Handle Graduation.0001;.001;.005 Dia "
Total Travel27.56 "
Swivel Angle+8.5 To -0.5 Degrees
Automatic Infeed Rate.00002 - 394 IPM "
Positioning Speed787 IPM
Min. Programmable Increment.00001 "
Travel Per Pulse Handle Revolution.01;.1;.5 "
Travel Per Pulse Handle Graduation.0001;.001;.005 "
WORKHEAD
Center Hole#4 MT
Work Spindle Speed Range10 To 800 RPM
Spindle Nose Diameter2.1653 "
FOOTSTOCK
Center Hole#4 MT
Automatic Positioning Stroke2 "
Taper Adjustment+/-.0049 "
MOTORS
Wheel Spindle Drive5 HP.
Wheelhead Feed Drive2 HP.
Table Feed Drive2 HP.
Work Spindle Drive.7 HP.
Hydraulic Pump Drive1 HP.
Coolant Pump Motor.2 HP.
TANKS
Coolant Tank Capacity52.8 Gal.
Hydraulic Tank Capacity10.6 Gal.
Table Way Lube Tank.7 Gal.
DIMENSIONS
Length94.5 "
Depth (Width)113.1 "
Height77 "
Weight9460 Lbs.
Equipped With
OSP 500G/CRT CNC Control
Internal Spindle #MQ90202 W/Quill #P301-1650 - 10,000 to 20,000 RPM
Internal Spindle #MQ90302 W/Quill - 15,000 To 30,000 RPM
IGF Function
Interface For 8" Floppy Disc Drive
3 Wheel Flanges #1345-2330
Wheel Balancing Stand