1997 Okuma LT-15MY — UMS record #14467
CNC Lathes
Historical UMS record #14467
Specifications
CAPACITY
Swing (Left headstock / Right headstock)21.65 "
Swing Over Cross Slide (LH / RH)18.9 "
Maximum Machining Diameter (LH / RH)8.27 "
Maximum Machining Length (LH / RH)7.8 "
Maximum Distance Between Spindles46.6 "
SPINDLE
Spindle Speed: Minimum (RPM) (LH / RH)75 rpm
Maximum (LH / RH)4500 rpm
Spindle Bore (LH / RH)2.44 "
Spindle Nose (LH / RH)A2-6
Main Motor (HP) (LH / RH)20 hp
TURRET
Number Of Turrets2
Number of Positions (LH / RH)12/12
X-Axis Travel (LH / RH)7.1" - 1.97" "
Z-Axis Travel (LH / RH)18.11/35.43 "
CHUCK
Diameter (LH / RH)8 "
Hole Thru (LH / RH)2 "
Number of Jaws (LH / RH)3
LIVE TOOLING
Number of Live Positions12 + 12
Motor5 hp
Speeds100 To 4500 rpm
TRAVELS
C-Axis (Both Spindles).001
Y-Axis+2.76"/ - 1.97"
XA-Axis7.1" -1.97"
XB-Axis7.1" -1.97"
ZA-Axis18.11"
ZB-Axis35.43"
ZC-Axis18.11"
RAPIDS
Z-Axis944 IPM
X-Axis787 IPM
TURRET
TypeVertical Drum
Number Of Turrets2
Number Of Turret Positions On Each12 Rotary
DIMENSIONS
Floor Space (Not Incl. Bar Feed & Chip Conveyor)120" x 80"
Height83"
Weight18,040 Lbs.
Equipped With
OSP 7000L/CRT CNC Control, 7-Axis
Color Graphics
Conversational Programming
(2) 8" SMW Quick Change Hydraulic Chucks
(1) Microcentric Chuck
Multi Tap Transformer
Parts Catcher
Bar Feed Interface
LNS Quick Load Bar Feed System
Spindle Orientation
Chip Conveyor ( Rear Discharge)
Load Monitor B & Spindle Overload Detection
C-Axis Contouring Function
(11) Rotary Heads
All Standard Tool Holders
All Available Manuals