Historical vertical machining center specifications based on 7 UMS machine records spanning 1995–1999.
Historical reference information — not a machine-for-sale listing. Values can vary by year, control, spindle package and optional equipment.
Historical MC-60VAE Specifications by Year
Each block below is an actual historical UMS machine record for this exact model. Differences by year, control and configuration are preserved rather than averaged together.
1995 Okuma MC-60VAE
1995 Okuma MC-60VAE historical configuration
Control: OSP-7000M/CRT
X-Axis Travel59.06 "
Y-Axis Travel24.8 "
Z-Axis Travel24.02 "
Table Width24.8 "
Table Length60.24 "
Maximum Table Load3300 lbs
Spindle Taper50
Main Motor (HP)30/25 hp
Tool Changer Positions20 atc
Spindle Nose to Table Minimum9.05 "
1 historical UMS record: #14320
1996 Okuma MC-60VAE
1996 Okuma MC-60VAE historical configuration
Control: OSP-7000M/CRT
X-Axis Travel59 "
Y-Axis Travel24.8 "
Z-Axis Travel22.04 "
Table Width25 "
Table Length60 "
Maximum Table Load3300 lbs
Spindle Taper#50
Main Motor (HP)30 hp
Tool Changer Positions20 atc
2 historical UMS records: #17423, #3215
1997 Okuma MC-60VAE
1997 Okuma MC-60VAE historical configuration
Control: OSP 7000M/CRT
X-Axis Travel59.08"
Y-Axis Travel24.8"
Z-Axis Travel24.02"
Table Width24.8 "
Table Length60.24 "
Maximum Table Load3300 lbs
Spindle Taper#50
Main Motor (HP)30 hp
Tool Changer Positions40 atc
Spindle Nose to Table Minimum7.9" "
2 historical UMS records: #14102, #15432
1999 Okuma MC-60VAE
1999 Okuma MC-60VAE historical configuration
Control: OSP-7000M/CRT
X-Axis Travel59.06 "
Y-Axis Travel24.8 "
Z-Axis Travel24.8 "
Table Width24.8 "
Table Length60.24 "
Maximum Table Load3300 lbs
Spindle Taper50
Main Motor (HP)30/25 hp
Tool Changer Positions20 atc
Spindle Nose to Table Minimum9.05 "
2 historical UMS records: #30161, #17363
Have a Machine to Sell or Trade In?
Have a machine you’re ready to sell, or looking to trade toward new equipment? We’ll be happy to work directly with you or with your OEM distributor if it’s a trade-in.
