1997 Star SR-32 — UMS record #14324
CNC Lathes
Historical UMS record #14324
Specifications
CAPACITIES
Maximun Turn Diameter32 mm
Maximun Drilling Capacity14 mm
Maximun Milling Capacity10 mm
MAIN SPINDLE
Spindle Speed - Low350 RPM
Spindle Speeds - High7000 RPM
Maximun Headstock Stroke310 mm
Spindle Motor7.3/10 HP.
Spindle Bore34 mm
Main Spindle Indexing1 °
TURRET
Number Of Tools6 Postions
LIVE TOOLS
Number Of Driven Tools4 Positions
Speeds350 - 5000 RPM
Motor1 HP.
ENDWORK TURRET
Number Of Tools4 Positions
Maximun Drilling Capacity14 mm
Maximun Tapping CapacityM12 x P1.75 mm
BACKWORK SPDL
Maximun Chucking Diameter32 mm
Maximun Length For Front Ejection125 mm
Maximun Parts Projection Length45 mm
Number Of Spindles4 Positions
Maximun Drilling Capacity13 mm
Maximun Tapping CapacityM10 x P1.5 mm
SUB-SPINDLE
Motor5 HP.
Indexing1 °
Spindle Speeds350 - 7000 RPM
DIMENSIONS
Length (Not Including Barfeed)99.09 "
Width67 "
Height73.7 "
Weight6160 "
Equipped With
Iemca Boss 542 Hydrostatic Barfeed System With: (New Cost $40,303.00)
Guide Channel Set
Barstock Collet
Elastic Bushing/Bar
Capacity: 5 To 42mm
Synchro Kit For Sliding Headstock
Telescopic Front Nose
Spindle Liner - 5/8" Capacity
Adaption/Interface To Star SR-32
Chip Conveyor
Broken Cut-Off Tool Detector W/Air Regulator (New Cost - $1295.00)
Tool Setter For Tool Stations 1 Thru 6 (New Cost - $2,050.00)
Sub-Spindle
Sub-Spindle Airblow Version A, Air Regulator Rod (New Cost - 1,680.00)
1 Degree Indexing On Sub-Spindle (New Cost - $2,440.00)
Rigid Tapping (New Cost - $1,600.00)
Backworking Attachment
Revolving Guide Bushing Unit
334-45 Main Spindle Inner Tube With 11.7mm Bore
Work Light
Steppable Coolant Oil Tank W/Oil Level Detector
Automatic Centralized Lubricating System
Sub-Spindle Speeds Display Function On CRT
334-09 Parts Ejector
(3) Live Milling Toolholder Units (Model 331-50)
(1) Cross Tapping Unit (Model 331-51)
Star Parts Display Function
Inch/Metric Conversion (G20/21)
Tool Nose Radius Compensation (G40-42)
Multi-Repetitive Canned Cycles (G70-76)
Spindle Speed Fluctuation Detection Function (G25/G26)
Constant Surface Speed Control (G96/G97)
Thread Chasing Function (G32/G92)
C-Axis W/1 Degree Indexing
Parts Ejection Detection Function
Misc. Toolholders
All Available Manuals