Taylor-Winfield EBB-3-50 Specifications

Historical EBB-3-50 Specifications by Year

Choose a recorded year below. Each configuration is joined to specifications only by its exact historical InvID.

1998 Taylor-Winfield EBB-3-50 — UMS record #13322

WELDERS, SPOT

Historical UMS record #13322

Specifications

SPECIFICATIONS

Throat Depth To Centerline Of Ram8"

Ram stroke1.75"

WELDING FORCE

2" Diameter Cylinder (80 PSI)35 To 250 Lbs.

3" Diameter Cylinder (80 PSI)70 To 565 Lbs.

4" Diameter Cylinder ( 80 PSI)125 To 1000 Lbs.

LOWER HORN

Vertical Adjustment4"

Size1.25" x 2"

1" Diameter Lower Electrode HolderEjector Type

Length6"

UPPER ELECTRODE

Holder TypeEjector Or Screw

ELECTRODES

Upper & Lower Length1.5"

Water CooledYes

Equipped With

A Hardened & Ground Steel Ram which operates in a sealed antifriction linear ball

bearing bushing.

Extremely Low Friction Air Cylinder - 1000 Lb. Force System on 50 Kva.

Gravity ram drop with electrical interlock for easy set-up

Air Pressure Regulator, Gauge, Force Chart, & Speed Control Valves

Airline Lubricator & Filter with Water trap & Automatic Drain

Air Exhaust Muffler

Single Stage Foot Switch

Built-In 8-Step & Series Parallel Tap Switches For 16 Steps Of Transformer Output

NEW COST

$15,000.00

Looking for a Taylor-Winfield EBB-3-50?

Tell us what you need and Used Machinery Source can help locate one.

View Available Machines Tell Us What You Need →

Have a Machine to Sell or Trade In?

Have a machine you’re ready to sell, or looking to trade toward new equipment? We’ll be happy to work directly with you or with your OEM distributor if it’s a trade-in.

Tell Us About Your Machine