UMS MACHINERY SPECIFICATION LIBRARY

Heckert / WMW / Niles DP 2/S 3 Specifications

Historical specifications from exact UMS machinery records.

Historical Specification Information: Specifications may vary by year, control, configuration, and optional equipment.

Choose the model year below

Lathes, Manual

Historical UMS record #16219

CAPACITY

Swing98.42 "

Swing Over Cross Slide/carriage64 "

Distance Between Centers412 "

SPINDLE

Spindle Speed: Minimum (RPM)2.8 rpm

Maximum140 rpm

Spindle Bore4.75 "

Main Motor (HP)80 hp

CHUCK

Diameter78.74 "

Number of Jaws4

TAILSTOCK

Quill Diameter8.5 "

78.74" (2000 mm) 4-Jaw Chuck, with removable top jaws

(2) Bed Sections with Hardened Bed Ways

(1) Bed and Saddle Unit with Power Compound, (Permits Taper Turning)

Four Position Tool Holder

Carriage Rapid Traverse on two axes, @ 5000 mm / minute (196" minute)

Power Tail stock

(2)- Roller type Heavy Duty Steady Rest 30" dia , Roller Type

(1) Set of High Tonnage Under Rollers

Thread Cutting, Inch & Metric with (15) Threading Change Gears

Headstock Gears are Helically Toothed, Hardened and Ground

Centralized Headstock Lubrication System with separate Motor Driven Pump

Looking for a Heckert / WMW / Niles DP 2/S 3?

Tell us what you need and Used Machinery Source can help locate one.

Tell us about your machine. We'll be happy to work with you or your OEM distributor if it's a trade-in.