UMS MACHINERY SPECIFICATION LIBRARY

Lehmann C-306 (Center Driven) Specifications

Historical specifications from exact UMS machinery records.

Historical Specification Information: Specifications may vary by year, control, configuration, and optional equipment.

Choose the model year below

Lathes, Manual

Historical UMS record #3786

CAPACITY

Swing37.75 "

Swing Over Cross Slide/carriage30.75 "

SPINDLE

Spindle Speed: Minimum (RPM)0 rpm

Maximum388 rpm

Spindle Bore17 "

Main Motor (HP)40 hp

CENTER DISTANCE

Left of Headstock17'

Right of Headstock34'

NOTE

This is a center driven lathe with 17" hole through spindle. Total bed length

is 54'. 17' left and 34' right of headstock.

17" bore thru head & both chucks

Taper Attachment - 34'

Steady Rest

(2) Turrets w/(6) Holders Each

Tailstock #6

(2) Chucks - (1) on each side of head.

HISTORY

Machine was purchased by the US War Department, run for (2) years and

then stored until 1992. Machine is in excellent condition as it has been used

very little. It may be inspected under power.

Looking for a Lehmann C-306 (Center Driven)?

Tell us what you need and Used Machinery Source can help locate one.

Tell us about your machine. We'll be happy to work with you or your OEM distributor if it's a trade-in.