(256) 980-1200
← Warner & Swasey Specifications
UMS MACHINERY SPECIFICATION LIBRARY

Warner & Swasey 4A Series M3580 Specifications

Historical specifications from exact UMS machinery records.

Historical specification information — not a machine-for-sale listing. Specifications can vary by year, control, configuration and optional equipment.
Machine type: Lathes, Manual

Historical 4A Series M3580 Specifications by Year

Choose a recorded year below. Each configuration is joined to specifications only by its exact historical InvID.

1966 Warner & Swasey 4A Series M3580 — UMS record #30253

Lathes, Manual

Historical UMS record #30253

Specifications

SPECIFICATIONS
Swing Over Bed28.25 "
Swing Over Cross Slide22.44 "
Bar Capacity12 "
HEXAGON TURRET
Max. Distance Spindle To End Of Turret Face80 "
SPINDLE
Speeds10 - 526 RPM
Number Speed Ranges32
Spindle Motor75 HP.
Spindle Bore12.25 "
CHUCK
Diameter28 "
Hole12 "
Number Of Jaws3

Equipped With

Square head w/Hydraulic Preselector
Powered Barfeed w/Fine and Corse feed
Rapid Traverse Both Aprons
Reverse Feed Both Aprons
A1-20 Spindle Nose
Taper Attachment on Carriage
Swivel Compound with Power Feed
Open Type Flat Seat 8-1/2" Square Tool Post
Hydraulic Tracer Slide Tool For Cutting Taper Bores
5 Slide Tools and Multi bar Holder with Pilot Bar
Longitudinal Feed Dials on Both Aprons
Coolant Pump & Guards
Way Covers & Guards
Misc. Hex Turret Tooling

1966 Warner & Swasey 4A Series M3580 — UMS record #17244

Lathes, Manual

Historical UMS record #17244

Specifications

SPECIFICATIONS
Swing Over Bed29.5 "
Swing Over Cross Slide22.44 "
Bar Capacity12 "
HEXAGON TURRET
Max. Distance Spindle To End Of Turret Face128 "
Max. Turn Length107.625 "
Longitudinal Feed0.005 - 0.167 IPM
CROSS SLIDES
Longitudinal Travel115.57 "
Cross Travel17 "
Longitudinal Feed0.005 - 0.167 IPM
Cross Feed0.003 - 0.103 IPM
SPINDLE
Speeds10 - 526 RPM
Number Speed Ranges16
Spindle Motor75/37 HP.
Spindle Bore12 "
CHUCK
Diameter28 "
Number Of Jaws3
DIMENSIONS
Length262" "
Width93 "
Weight24,000 Lbs.

Equipped With

12" Spindle Bore
48" Extended Bed Length
28" 3-Jaw Chuck w/Power Chuck Wrench & Controls
(2) M1840 Sliding Tool Holders
(4) Flanged Tool Holders - 4-Way Tool Post
Power Rapid Traverse - Hard Ways

Looking for a Warner & Swasey 4A Series M3580?

Tell us what you need and Used Machinery Source can help locate one.

View Available MachinesTell Us What You Need →

Have a Machine to Sell or Trade In?

Have a machine you’re ready to sell, or looking to trade toward new equipment? We’ll be happy to work directly with you or with your OEM distributor if it’s a trade-in.

Tell Us About Your Machine